Model Number

MT200

Thickness gauge MT200

1.        Capable of performing measurements on a wide range of material.

2.        Four transducer models.

3.        Probe-Zero function, Sound-Velocity-Calibration function.

4.        Two-Point Calibration function.

5.        Two work modes: Single point mode and Scan mode.

6.        Coupling status indicator showing the coupling status.

7.        Auto sleep and auto power off function to conserve battery life.

8.        Optional software to process the memory data on the PC.

Optional thermal mini-printer to print the measured data via RS232

Configuration:

	Item	Quantity	Note
Standard Configuration	Main body	1
	Transducer	1	Model: N05/90°
	Couplant	1
	Instrument Case	1
	Operating Manual	1
	Screwdriver	1
	Alkaline battery	2	AA size
Optional Configuration	Transducer: N02		See Table3-1
	Transducer: N07
	Transducer: HT5
	Mini thermal printer	1
	Print cable	1
	DataPro for Thickness Gauge	1	For use on the PC
	Communication Cable	1

Specifications:

1.        Display:128×64 dot matrix LCD with EL backlight. mitech_k(at)mitech-tech.com

2.        Measuring Range：0.75～300mm (in Steel).

3.        Sound Velocity Range: 1000~9999 m/s.

4.        Resolution：0.1/0.01mm（selectable）.

5.        Accuracy： ±（0.5%Thickness+0.04）mm

6.        Units: Metric/English unit selectable.

7.        Four measurements readings per second for single point measurement, and ten per second for Scan Mode.

8.        Memory for 20 files (up to 99 values for each file) of stored values.

9.        Upper and lower limit can be pre-set. It will alarm automatically when the result value exceeding the limit.

10.    Power Supply：Two “AA” size, 1.5 volt alkaline batteries. 100 hours typical operating time (EL backlight off).

11.    Communication：RS232 serial port.

12.    Case：Extruded aluminum body suitable for use under poor working conditions.

13.    Outline dimensions：132H X 76.2W mm.

14.    Weight：345g

Appendix A: Transducer selection

Appendix B: Sound Velocity in different materials